New-gen Forigo Mulchers - built tougher for NZ
The new-generation Forigo mulchers are changing pasture renovation.
Hungry for work: Pantera 7004 raises the bar for high-capacity spraying
There are machines that fit into a spraying programme and then there are machines that reshape it. With maximum power of 306 hp, a 7,000 litre tank, boom widths stretching to 48 metres and operating speeds of up to 30 km/h the third-generation Amazone Pantera 7004 is firmly in the second category.
One pass with purpose: Why the Kverneland U-Drill fits New Zealand seeding reality
There is a point in every season when preparation gives way to commitment, because once the drill goes in the ground the decisions are largely made and the outcome becomes a matter of execution rather than intention. That moment is where the Kverneland U-Drill earns its keep not by promising miracles but by bringing together cultivation, consolidation and seeding into a single controlled process that suits the way modern New Zealand farms operate.
Practical cultivation without compromise
When it comes to seedbed preparation that balances strength with finesse, the Rata 812 Trailing Maxitill sits comfortably in territory that suits both contractors and large-scale farmers who need reliable output across changing conditions.
Holding the line at speed: Why the Kverneland Optima SX with Geoforce raises the bar for precision planting
The arrival of the Geoforce option to the Kverneland Optima SX range in New Zealand will matter for a simple reason that sits behind every good planting job, because once the seed is in the ground you are no longer making decisions, you are living with them and in a season where planting windows can be short and soil conditions can change from one end of a paddock to the other the value is not in clever features for their own sake but in the way a machine holds depth, holds spacing and holds consistency when the easy parts of the field are finished and the real work starts.
Turning stubble into opportunity
There is a point in every cropping rotation when residue management becomes the difference between a clean start and a compromised one. Stubble may look harmless on the surface, but how it is handled determines how quickly soils warm, how evenly seedbeds form and how efficiently nutrients cycle back into the system.
Maize resilience for the future from Corson Maize
As the maize sector moves into another harvest and farming year, with its familiar mix of opportunity and challenge, growers and wider industry participants continue to demonstrate resilience and a positive outlook. This has been evident despite the pressures of adverse weather, particularly the wet spring conditions experienced in the north and the weather events that occurred in January as well as ongoing pest incursions such as fall armyworm.
Re-defining cultivation: Why the Kverneland Qualidisc matters for New Zealand soils
Cultivation equipment often sits in the background of farm machinery conversations, yet it plays a critical role in setting up the season before seed ever meets soil. The Kverneland Qualidisc is not a drill or a planter, it is the machine that prepares the soil in a way that respects the unique variability of conditions across New Zealand paddocks - from lighter silts to heavier loams and everything in between.
Breaking Ground the Right Way
There is a moment in every cropping season when the decisions made months earlier start to show themselves in the paddock. It might be the way a crop establishes evenly across a slope, the way water runs clean rather than muddy after rain, or simply the confidence that comes from knowing the paddock was chosen and prepared with purpose. Crop establishment is rarely dramatic, yet it is one of the most influential stages in any farming system because it determines not only yield, but cost, risk and environmental outcome.
Locking in quality: Independent Wrap’s approach to better forage
Silage quality is one of those subjects that quietly determines the success of a season, because even when the weather plays its part and the chop is clean the work is not finished until the stack is sealed properly and fermentation has had time to settle.
What the new XAG Rover means for the future of crop farming
Technological change in agriculture usually arrives slowly, inching its way from research to trial plots before finding its place in commercial operations. Every so often though, something emerges that feels immediately relevant to the pressures growers face.
Raising the bar
There is a buzz going around town and it is all about the new annual ryegrass from PGG Wrightson Seeds.
Don’t sweat it – the cool secret to sowing success
What if one simple change could make a world of difference to your pasture renewal this autumn?
Making Maize Silage the Easy Way
Farmers and contractors looking to make high quality maize with no fuss can find it in MaizeKing. A locally made maize silage preservative by New Zealand biological solutions company, BioStart.
A couple of serious perennial ryegrasses.
Legion and Reason are two of Agricom’s recent ryegrass releases, backed by years of farmer experience and proven performance in the paddock.
Locking in quality: Independent Wrap’s approach to better forage
Silage quality is one of those subjects that quietly determines the success of a season, because even when the weather plays its part and the chop is clean the work is not finished until the stack is sealed properly and fermentation has had time to settle. Across the country contractors and farmers spend months preparing forage and yet the difference between average feed and exceptional feed often comes down to two decisions that sit outside the paddock, the inoculant applied on harvest day and the cover placed over the stack.
Next-generation accuracy with Topcon’s UC7 Plus Boom Control
Precision spraying continues to evolve at pace and Topcon Agriculture has once again shown why it remains a leader in the field with the launch of the UC7 Plus.
Award-winning Intuitu 2.0 takes the guesswork out of tyre pressure for tractors
Nokian tyres has introduced Intuitu 2.0 and it marks a genuine step forward for farmers who want to get the best out of their machinery without all the hassle of working out tyre pressures for different jobs.
A top-notch crop and chop
Contracting father and son team, Craig and Josh Pilet, are silage experts who have operated their family-owned lower North Island business for almost four decades.
New Harvest Profit program offers powerful cost and profit tracking
Farmers across Australia and New Zealand now have a unique new tool in John Deere’s Harvest Profit, a convenient cost and profit tracking software platform that offers near-real time profitability monitoring across crops and fields.